Smoke Device

Key information

Thin. Safe. customizable.

A Smoke Device that breaks the boundaries of what is possible. A multitude of innovations that no one would even imagine could fit into such a small case. Our Smoke Device is one of the thinnest on the market, completely silent, safe to use, long range remote contolled and the most important, it is the first Smoke Device that can be programed specially for your act, the first with a burned-coil indication and the first with a double coil for more smoke.

Smoke Device enclosure

At a glance

Main features

Different smoke modesQuick, short and extended smoke.
RemoteLong-range remote control. One remote can be linked to a few devices.
Coil checkDetects a burned or poorly placed coils. The device uses two coils at the same time.
USB-CFast charging and possibility to flash/update the device firmware.
Smart LEDOne LED shows all of the important information.
Super thin designDesign that disappears in the hand.
EnclosureExceptional temperature resistance and high impact strength.
Safety features

Cooling time

After every smoke production the device cools down. The time depends on how long it made smoke.

Low battery

It turns itself off when the battery is too low.

Auto turn-off

It turns itself off after some time without use. You can set exact minutes in the device page.

Emergency stop

The button on the device can stop the smoke/sequence in emergency.

Water-resistant

The electronics are partially water-resistant.

Two-way BMS

Battery management in both software and hardware.

Program it your way

Build your own sequence

Open the device page, connect over Bluetooth and build the sequence with simple blocks in any order.

  1. Connect your device from the Connect device page.

  2. Start sequence set up: Add blocks - Quick smoke, Short smoke, Long smoke and Delay block are available.
  3. Finish the sequence: Choose whether the device should turn off when the sequence finishes and see the total sequence time.
  4. Upload sequence to divice: Just press "Upload to device" and see the status "Saved on board". The sequence will start every time the remote sends its signal.
  5. Export or import a sequence as a file is possible.
▶ Remote signal received
  1. 1Short smoke5 s smoke + 5 s cooling
  2. 2Delay3 s, nothing happens
  3. 3Long smoke10 s smoke + 10 s cooling
■ Turn off when sequence finishes
Total time33 s

Smoke in rhythm

Make it to music

Load a song into the device page, press play and watch your sequence run against the music. Move the blocks until every smoke production lands exactly on the beat.

How it works
Add musicLoad your own song and see it as a timeline.
PreviewPlay the sequence preview together with the song and make the sequence perfect.
Use deviceSwitch it on and the real device makes smoke along with the preview and the music.
ExportSave the sequence together with its position in the music.

Read the device

LED indicator

A single LED tells you everything. You never have to guess.

While charging

  • Green battery full
  • Yellow battery needs more charging
  • Red battery fully drained

In use

  • Green blinking ready for smoke, battery level optimal
  • Red blinking ready for smoke, battery nearly drained
  • White smoke production
  • White blinking cooling after the smoke (the time depends on the type of press)
  • Blue blinking burned or poorly placed coil

In the box

Size & accessories

Main unit67.45 × 52.00 × 11.00 mmLength × width × height
Remote50.5 × 23.2 × 16.9 mmLength × width × height
AccessoriesIncludedWrist strap, spare custom heating coils and smoke liquid.

Next step

You want to see the Smoke Device in action?

You want to learn even more about the product?

Apply for a free private lecture